I ended up with some Dylon in Violet, Bahama Blue, and Rainforest Green. The Violet was to over dye the periwinkle yarn, while the blue and the green were to make a vareigated specimen. I skeined the yarns and tied them at 3 intersections loosely so the dye would be able to work its way in there. That turned out to be not such a good idea, because the yarn was pretty tangled by the end of it (there was a lot of agitation required for the violet dye).
Are you ready for the results?
This is a little less bright that shown in the picture, the white made it reflect a lot which is what I was going for since it was overcast that day, but it was a little much.
This is a pretty accurate representation of the color.
The amazon green on the package looked much brighter, so I was thinking that I would get a more tropical combination, but I like how this turned out. I mixed the dyes in an empty shampoo bottle (I couldn't find any proper squirt bottles at Jo-Ann's), and applied the dye. First the blue, and then the green. I put a little too much on, because there were puddles of dye at the bottom, so the bottom of the blue sections were turning blue-green. So I just covered the blue with the green and got a more muted change, which I ended up liking. The bahama blue was really vibrant at first, but after rinsing it washed out a bit.
Also, I didn't do the best job making sure that the yarn was thoroughly coated with dye in the blue/green one, so there are some light spots.
All in all I think it was a successful first dye attempt.
2 comments:
Good job, dyeing is rather addictive I warn you :D
wow those turned out really well! i'm so impressed :)
Post a Comment